Canon POWERSHOT A590 IS User Manual page 156

1541
The camera moves when ® Confirm the procedures in
the shutter button is "[] appears" (p. 152).
pressed.
AF-assist Beam is set to ® n dark places where it is difficult for
[Off]. the camera to focus, the AF-assist
Beam will emit to assist focusing. As
the AF-assist Beam will not function
when turned off, set it [On] to activate
it (p. 50). Take care not to obstruct the
AF-assist Beam with your hand when
used.
Subject is out of focal ® Shoot with the subject at the correct
range, focusing distance (p. 187).
®The camera may be set to an
unintended function (such as macro).
Cancel the setting.
The subject is hard to ® Use the focus lock or manual focus to
focus on. shoot (p. 96).
Insufficient light for ® Set the built-in flash to [] (Flash on)
shooting. (p. 60).
The subject is ® Set the exposure compensation to a
underexposed because positive (+) setting (p. 99).
the surroundings are too ® Use the spot metering function
bright. (p. 100).
Subject is too far away for ® Shoot within correct flash range of the
flash to reach, subject when using the built-in flash
(p. 188).
® Ra se the tSO speed and then shoot
(p. 68).