Canon POWERSHOT SD770IS DIGITAL ELPH User Manual page 59

57
[_] • The LCD monitor on or off setting is retained even after the
camera power is turned off.
• The LCD monitor is set to the information view in the ['_], M,
I_, I_1, [] or Movie mode. m
• In _, _, I_, [], I_, [] modes, the LCD monitor is
always set to information view. _"
O
• The LCD monitor will not switch to the Detailed Display or
Focus Check Display while in the Magnified Display (p. 112)
or Index Playback mode (p. 113). 5"
t_
Changing the LCD Monitor Brightness
The brightness of the LCD monitor can be changed in the following two
ways.
• Changing Settings Using the Set up Menu (p. 53)
• Changing Settings Using the DISP. Button (Quick-bright LCD
Function)
You can set the LCD monitor to the brightest setting regardless of the
option selected in the Set up menu by pressing the DISP. button for
more than one second.*
- To restore the previous brightness setting, press the DISP. button
for more than one second again.
- The next time you turn on the camera, the LCD monitor will be at
the brightness setting selected in the Set up menu.
* You cannot change the brightness of the LCD monitor with this function if you have
already set it to its highest setting in the Set up menu.
Night Display
When shooting in dark conditions, the camera automatically
brightens the LCD monitor to suit the brightness of the subject,
making it easier to frame the subject (this setting cannot be turned
off).
• Although noise may appear and the movement of the subject shown on the LCD
monitor may appear somewhat jagged, there is no effect on the recorded image.
The brightness of the image displayed in the monitor, and the brightness of the
actual image recorded will be different.