Upgrading From The Early Adopter Release; Network Setup - Sybase Adaptive Server Enterprise 12.5.x Quick Installation Manual

Preinstallation system setup

Upgrading from the early adopter release

Network setup

2
• device pathname –
master
/Applications/Sybase/System/devices/master.dat
• device size – 100MB
master
•
sybsystemprocs
/Applications/Sybase/System/devices/sybprocs.dat
•
sybsystemprocs
• Server page size – 4096 bytes
• Server default character set – iso_1
Upgrading from the Early Adopter release is not supported. If you have data
that you wish to save contained in the Early Adopter release, back it up using
. Then, uninstall the Early Adopter release as described in the Release
bcp out
Notes for that version.
Before proceeding with the installation, make sure your system is using a
resolvable host name for its network connection. Your machine is known to
TCP/IP by the name returned by the shell command
able to successfully execute a
window, execute:
% ping 'hostname -s'
When you configure your machine's name, be sure that there are no dashes in
the name; Adaptive Server cannot use dashes in object names.
If this does not succeed, use NetInfo to configure a resolved host name on your
system manually:
1 Start NetInfo Manager in /Applications/Utilitiesby double-clicking on its
icon from a Finder window.
2 Duplicate the localhost entry and give it the name of your machine.
To do this:
• Click the authentication icon to get system administrator status.
device pathname –
device size – 160MB
command to this name. From a terminal
ping
. You must be
'hostname -s'