Play; Play From Ipod/Iphone; Play From Bluetooth Device - Philips DS7880/37 User Manual

4 Play

Play from iPod/iPhone

You can enjoy audio from iPod/iPhone through
this docking speaker.
Compatible iPod/iPhone
The docking speaker supports the following
iPod/iPhone models.
Made for :
• iPhone 5
• iPod nano (7th generation)
• iPod touch (5th generation)
Load the iPod/iPhone
Insert your iPod/iPhone into the dock.
To remove the iPod/iPhone
• Pull your iPod/iPhone out of the dock.
Listen to the iPod/iPhone
Note
•
Make sure that the iPod/iPhone is loaded correctly.
•
Make sure that you deactivate bluetooth connection by
sliding to the OFF position.
• Start music play in your iPod/iPhone.
» You can hear music from this docking
speaker.
Charge the iPod/iPhone
When the docking speaker is connected to wall
power outlet, the docked iPod/iPhone begins
to charge.
Tip
•
You can also charge your iPod/iPhone through the
built-in battery.

Play from Bluetooth device

Note
•
The effective operation range between the docking
system and the paired device is approximately 10
meters (30 feet).
•
Keep this docking speaker away from other electronic
devices that may cause interference.
1
Slide to select Bluetooth source.
» The Bluetooth indicator blinks.
2
Activate the Bluetooth function in your
Bluetooth device (see the device user
manual).
3
Select "PHILIPS DS7880" displayed on
your device for pairing.
» If connection is successful, the
docking speaker beeps twice, and the
Bluetooth indicator stops flashing.
• For some devices, you need to input
"0000" as pairing password.
4
Start music play on your Bluetooth device.
EN 8