Control Settings - GE GSC1807 Owner's Manual

About the dishwasher control panel.
You can locate your model number on the tub wall just inside the door. Throughout this manual, features and appearance
may vary from your model.

Control Settings

Wash Cycles (vary depending on model)
1
POTS & PANS For heavily soiled dishes or cookware with dried-on or baked-on soils. Everyday dishes may
COOKWARE be included. This cycle will not remove burned-on foods.
PLATE WARMER For warming clean dishes and serving plates. This cycle will take approximately 36 minutes.
Options
2
HEATED DRY ON Turns the heating element on for fast drying. This option will extend the time of your wash cycle.
HEATED DRY OFF Turns HEATED DRY ON off. Dishes air dry naturally and energy is saved.
EXTRA HEAT Wash temperature will be a little higher.
HOT START Wash time will be a little longer, and initial wash temperature will be higher.
Start
3
Slowly turn the Dial to the desired position on the Dial after selecting a drying option. Don't turn it
past that position, or you could accidentally miss a rinse. There is a time delay between start-up and
water fill so you will not hear any wash action right away.
Electronic models: After selecting wash cycle and options, press the Start button.
SUPER For heavily soiled dishes or cookware. For dried-on or baked-on soils, use the POTS & PANS
cycle. Everyday dishes may be included.
NORMAL For loads of everyday dishes, glasses and cookware with medium soils. NOTE: Many dishes have
lighter soil than normal. Choosing a cycle other than NORMAL WASH will save energy and water.
LIGHT For dishes with light soils.
CHINA For lightly soiled china and crystal, use the CHINA cycle.
RINSE For rinsing partial loads that will be washed later. DO NOT use detergent or HEATED DRY
OPTION.
DELAY You can select 2, 4 or 8 hours later to start the dishwasher.
GEAppliances.ca
5