Table of Contents
Advertisement
Description
Dimensions
Installation
Overview
Details will vary when
installing to other
interfaces.
2
The TS0861 Magnetic Swipe Card Reader is designed to
mount on metal window or door frames (mullions or
architraves) and is suitable for any indoor location that
requires a small reader.
The TS0861 incorporates all interface electronics necessary
to interface to the TS0862 Smart Door Controller. The
reader operates on +5VDC supplied directly from the
TS0862.
The TS0861 may also be used with other suitably-configured
products that have a Wiegand interface, including the
TS0867 4-Door Controller, TS0802 8-Area Arming Station,
and third-party devices.
The overall process of installing the TS0861 and connecting
to a TS0862 Smart Door Controller is as follows:
1. IMPORTANT — Set the pwr link on the TS0862 to +5
volts. Do not use any other voltage to power the TS0861.
2. Mount the TS0861 using suitable hardware.
3. Check for correct operation using a suitable Magnetic
Swipe Card.
TS0861 Magnetic Swipe Card Reader Installation Guide
Advertisement
Table of Contents
