Switching Source Signals; Adjusting The Volume - HANNspree WT01-15A1 User Manual

Switching Source Signals

Press SOURCE to select the in
coming source signal..
The current source setting
40
(TV/CATV, AV1, AV2 or PC )
appears on the upper left corner
of the screen.
Note
Source
The TV supports S-Video input in
addition to normal video and
audio signals. The TV detects the signal type automatically and gives pri-
ority to S-Video when two signals are detected at the same time.

Adjusting the Volume

Press VOL UP button to
increase the volume. Press
VOL DOWN button to
decrease the volume. The
volume level is displayed on
48
the TV.
Volume level
Volume up
Volume down
30