Smb Setup - Advantek Networks (USB 2.0) User Manual

SNMP Community: The print server supports up to two community names. The default
Support HP WebJetAdmin: This option allows user determine to disable/enable the Support HP
SNMP Traps: Enable the function of sending SNMP Authentication Failure trap message to the
network administrator, if the community name within a SNMP request is not
correct.

SMB Setup

The print server supports the SMB (Server Message Block) protocol, user can send the print jobs
through Network Neighborhood without installing print server's driver.
1. Click Setup, it appears the sub-menu.
2. Click SMB, it as shown in the following picture.
community name is public (case-sensitive), with Read Only access
right in default.
WebJetAdmin.