Subscribe to Our Youtube Channel
Related Manuals for LG LRFD25850ST
Summary of Contents for LG LRFD25850ST
- Page 1 BO'I-I'OM FREEZER REFRIGERATOR °s Guide Please read this guide thoroughly before operating and keep it handy for reference at all times. 'rEUR I"EUR avant de mettre & portee de la referencia P/No. 3828JL8032B...
-
Page 2: Table Of Contents
English Version Removing Crisper French Version Crisper Cover with Lattice on inner Surface Spanish Version Glide N Serve Warranty (U.S.A.) Modular Door Bin Warranty (CANADA) Dairy Bin Safety Instructions Egg Box Grounding Requirements I_ Freezer section Parts and Features Tilting Door 8-14 Refrigerator Installation... -
Page 3: Warranty (U.s.a.)
Your LG Refrigerator will be will repaired or replaced, at LG's option, if it proves to be defective in material or workmanship under normal use, during the warranty period ("Warranty Period") set forth below, effective from the date ("Date of Purchase") of original consumer purchase of the product. This warranty is good only to the original purchaser of the product and effective only when used in the United States, including Alaska, Hawaii, and U.S. -
Page 4: Warranty (Canada)
(CANADA) LG REFRIGERATOR LG Electronics will repair or at its option replace, without charge, yore product which proves to be detective in material or workananship under normal use, during the warranty period listed below fiom the date of original purchase. This warranD is good onb 7to the original purchaser of the product during the warranD period as long as it is in any Canadian Pro+Jnce. -
Page 5: Safety Instructions
This guide contains many important safety messages. Always read and obey all safety messages. This is the safety alert symbol. It alerts you to safety messages that inform you of hazards that can kill or hurt you or others, or cause damage to the product. All safety messages will be preceded by the safety alert symbol and the hazard signal word DANGER, WARNING, CAUTION. -
Page 6: Grounding Requirements
BEFORE YOU THROW AWAY Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators are still YOUR OLD REFRIGERATOR dangerous...even if they will sit for just a few days. If OR FREEZER you are getting rid of your old refrigerator, please follow the instructions at right to help prevent accidents. -
Page 7: Parts And Features
Use this page to become more familiar with the parts and features. Page references are included for your convenience. NOTE: This guide covers several different models. The refrigerator you have purchased may have some or all of the items listed below. The locations of the features shown below may not match your model. -
Page 8: Refrigerator Installation
INSTALLATION 1. To avoid vibration, the unit must be level. If required, adjust the leveling screws to compensate for Excessive Weight Hazard unevenness of the floor. The front should be slightly Use two or more people to move and install higher than the rear to aid in door closing. - Page 9 HOW TO REMOVE DOOR HANDLES To move refrigerator through a house door, it maybe necessary to remove the refrigerator door handles. NOTE: Handle appearance may vary from illustrations on this page. 1. Removing Refrigerator Handle • Grasp the handle tightly with both hands and slide the handle up (1)(this may require some force).
- Page 10 HOW TO REPLACE DOOR HANDLES NOTE: Handle appearance may vary from illustrations on this page. 1. Replacing Refrigerator Door Handle • Align keyhole slots (1) on the top and bottom of the back of the handle with the screws (2) mounted on the front of the door.
-
Page 11: Removing And Replacing
REMOVING AND REPLACING REFRIGERATOR DOORS 1. Removing Refrigerator Door A, CAUTION: Before you begin, unplug the refrigerator. Remove food and bins from doors. • Left Door 1. Disconnect water supply tube by pushing back on the disconnect ring (4). 2. Open door. Loosen top hinge cover screw (1). Use flat tip screwdriver to pry back hooks on front underside of cover (3). - Page 12 2. Replacing Refrigerator Door • Right Door 1. Lower the door onto middle hinge pin (10). 2. Fit top hinge (8) over hinge lever latch (9) and into place. Insert hinge lever (7) under lever latch. Rotate lever counterclockwise to secure hinge. 3.
- Page 13 HOW TO REMOVE AND INSTALL THE 2. Installing Pullout Drawer PULLOUT DRAWER • Pull both rails (1) out to full extension. IMPORTANT: To avoid possible injury, product or property damage, you will need two people to perform the following instructions. 1.
-
Page 14: And Doors
LEVELING AND DOOR ALIGNMENT 3. Open both doors again and check to make sure that they close easily. If not, tilt the refrigerator slightly more Leveling to the rear by turning both leveling screws clockwise. It may take several more turns, and you should turn both Your refrigerator has two front leveling screws--one leveling screws the same amount. -
Page 15: Using Your Refrigerator
ENSURING PROPER AIR CIRCULATION SETTING THE CONTROLS In order to ensure proper temperatures, air must flow • Your refrigerator has a control pad on the dispenser that between the refrigerator and freezer sections. As shown lets you regulate the temperature in the freezer and in the illustration below, air enters at top of freezer and refrigerator compartments. -
Page 16: Adjusting Control Settings
ADJUSTING CONTROL SETTINGS FOOD STORAGE GUIDE Give the refrigerator time to cool down completely before Wrap or store food in the refrigerator in airtight and making final adjustments. It is best to wait 24 hours moisture-proof material unless otherwise noted. This before doing this. -
Page 17: Storing Frozen Food
STORING FROZEN FOOD REFRIGERATOR SECTION NOTE: For further information about preparing food for WATER DISPENSER freezing or food storage times, check a freezer guide or a reliable cookbook. Push up the dispenser switch with a glass until you hear click to get cold water. Packaging Successful freezing depends on correct packaging. -
Page 18: Refrigerator Shelves
REFRIGERATOR SHELVES _, CAUTION: Make sure that shelves are level from one side to the other. Failure to do so may result in the The shelves in your refrigerator are adjustable to meet shelf falling or spilling food. your individual storage needs. Your model may have glass or wire shelves. -
Page 19: Optibin Crisper
OPTIBIN CRISPERS • Crispers with rails To remove crisper: 1. Pull drawer out to full extension. 2. Lift the front of basket up and pull straight out. The Optibin Crispers provide fresher-tasting fruit and vegetables by letting you easily control humidity inside the crisper. -
Page 20: Crisper Cover With Lattice On Inner Surface
CRISPER COVER WITH LATTICE ON INNER To remove crisper door flap: 1. Raise the door flap as high as it will open. SURFACE 2. Press the plastic hinge toward the center of the door To remove the lattice on inner surface: flap with your finger. -
Page 21: Glide N Serve
GLIDE N SERVE The Glide N Serve provides storage space with a variable temperature control that keeps the compartment colder than refrigerator temperature. The drawer also features a self- opening lid that opens whenever the drawer is pulled open. This drawer can be used for large party trays, deli items, or beverages. -
Page 22: Dairy Bin
DAIRY BIN FREEZER SECTION 1. To remove the dairy bin, simply lift it and pull straight TILTING DOOR out. The tilting door provides easy access for stored foods. 2. To replace the dairy bin, slide it in above the desired How to use: location and push down until it stops. -
Page 23: Freezer Wire Door Rack
DURABASE DIVIDER FREEZER WIRE DOOR RACK (LRFD25850** only) The Durabase divider allows you to organize the To remove basket Durabase area into sections. 1. Pull one of the brackets upward. 2. Remove basket from both brackets. To replace basket 1. Insert bracket into one side. Hook end of basket into bracket. -
Page 24: Water Filter
WATER FILTER 2. Replace with a new cartridge. Take the new cartridge out of its packaging and remove It is recommended that you replace the filter when the protective cover from the o-rings. water filter indicator light turns on or your water dispenser With cartridge knob in the vertical position, push the new or ice maker performance decreases noticeably. -
Page 25: Care And Cleaning
CONDENSER COILS Remove base cover. (See the base cover section on page 14.) Use a vacuum cleaner with an extended attachment to clean condenser coils. Vacuum coils when dusty or dirty. Coils may need to be cleaned as often as every other month. Replace base cover. -
Page 26: Power Interruptions
Tochangefreezer WHEN YOU GO ON VACATION light: 1. Unplug refrigerator power cord form outlet. If you choose to leave the refrigerator on while you are away, follow these steps to prepare your refrigerator 2. Pull light bulb cover down to remove. before you leave. -
Page 27: About The Automatic Icemaker
NOTE: If the cube size is smaller or larger than you expected, you can regulate the size with the cube size button. Personal Injury Hazard Every time you press the cube size button, the indicator moves up on light. The higher the light position, the larger Avoid contact with the moving parts of the ejector mechanism, or with the heating element that releases the cubes will be. -
Page 28: Connecting The Water Line
Two 1/4" outer diameter BEFORE YOU BEGIN compression nuts and This water line installation is not warranted by the 2 ferrules (sleeves) to refrigerator or icemaker manufacturer. Follow these connect the copper tubing to instructions carefully to minimize the risk of expensive the shutoff valve and the water damage. - Page 29 INSTALLATION INSTRUCTIONS 7. CONNECT THE TUBING TO THE VALVE (CONTINUED) Place the compression nut and ferrule (sleeve) for copper tubing onto the end of the tubing and FASTEN THE SHUTOFF VALVE connect it to the shutoff valve. Make sure the tubing is fully inserted into the valve.
- Page 30 4. Insert the tube into the valve and fasten with wrench CONNECT THE TUBING TO THE REFRIGERATOR as shown in the figure below. Removing and Replacing Valve Cover NOTE: • Before making the connection to the refrigerator, be sure the refrigerator power cord is not plugged into the wall outlet.
- Page 31 10.TURN THE WATER ON AT THE SHUTOFF VALVE Tighten any connections that leak. Reattach the compressor compartment access cover. 11.PLUG IN THE REFRIGERATOR Arrange the coil of tubing so that it does not vibrate against the back of the refrigerator or against the wall. Push the refrigerator back to the wall.
-
Page 32: Troubleshooting Guide
• The defrost timer will click when the automatic defrost UNDERSTANDING SOUNDS YOU MAY HEAR cycle begins and ends. The thermostat control (or Your new refrigerator may make sounds that your old one refrigerator control, depending on the model) will also didn't make. - Page 33 Check if... Then... COMPRESSOR • Modern refrigerators with more storage The refrigerator that was replaced was an MOTOR SEEMS older model. space require more operating time. TO RUN TOO • The motor will run longer under warm The room temperature is hotter than normal. MUCH conditions.
- Page 34 Check if... Then... ICE HAS OFF- • Discard first few batches of ice to avoid The icemaker was recently installed. TASTE OR ODOR discolored or off-flavored ice. • Throw away old ice and make new supply. The ice has been stored for too long. •...
- Page 35 Check if... Then... TEMPERATURE The air vents are blocked. Cold air circulates • Locate air vents by using your hand to IS TOO WARM from the freezer to the fresh food section and sense airflow and move all packages that OR THERE IS block vents and restrict airflow.
-
Page 36: French Version
_ics IHG=...
Need help?
Do you have a question about the LRFD25850ST and is the answer not in the manual?
Questions and answers
Ice maker is not making cubes. Seems like the water just goes in ice tray bucket an freezes.
The LG LRFD25850ST ice maker may not be making ice cubes due to several possible reasons:
1. Initial Setup: It can take 12 to 24 hours to begin making ice. The first few batches should be discarded to clear the water line.
2. Feeler Arm Obstruction: If something blocks the sweep of the feeler arm or if the bin is full, the ice maker will stop producing ice.
3. Ice Bucket Jammed: A jammed ice bucket can disrupt the ice-making process. It may cause the sensor to falsely indicate the bucket is full or prevent ice from being dispensed.
4. Iced-Up Water Line: A frozen water line blocks water from reaching the ice tray. This can occur if the freezer temperature is set too low. Signs include a buzzing sound from the ice maker and a non-working water dispenser.
5. Improper Water Line Connection: If the water line is not correctly installed or has issues like water hammer, it may cause leaks or prevent water flow.
Each of these issues should be checked and resolved to restore normal ice production.
This answer is automatically generated