PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications
6.48
FOCUS + Command
Command
"C4B" [CR]
Adjust on-screen focus by making focal length longer. (The lens moves backward
Detail
This command works the same way as "FOCUS ▲" button of the remote control.
Acceptable
Response
Unacceptable
6.49
FOCUS - Command
Command
"C4A" [CR]
Adjust on-screen focus by making focal length shorter. (The lens moves forward
Detail
This command works the same way as "FOCUS ▼" button of the remote control.
Acceptable
Response
Unacceptable
6.50
INPUT 1 ANALOG RGB Command
Command
"C50" [CR]
Select Analog RGB input in Input 1.
Detail
Although projector returns "OK", Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable
Response
Unacceptable
6.51
INPUT 1 SCART Command
Command
"C51" [CR]
Select SCART input in Input 1.
Detail
Although projector returns "OK", Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable
Response
Unacceptable
6.52
INPUT 1 DVI (PC DIGITAL) Command
Command
"C52" [CR]
Select DVI (PC Digital) input in Input 1.
Detail
Although projector returns "OK", Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable
Response
Unacceptable
6.53
INPUT 1 DVI (AV HDCP) Command
Command
"C53" [CR]
Select DVI (AV HDCP) input of Input 1.
Detail
Although projector returns "OK", Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable
Response
Unacceptable
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
20/28
)
)