Epson 4012033-00 XXX User Manual page 58

3. Using the Drive list box and Folder list, specify the
folder in which you would like to save the screen
captures.
If you need to create a new folder for the images,
click New Folder and type a folder name.
Note:
To select a folder located on a network drive, you may
need to map the drive before opening EPSON File
Converter. For details, see your Windows
documentation.
4. Using the Hot Key settings, specify the key
combination that you will press to make screen
captures. Select the ALT, CTRL, or SHIFT check box,
then select a key from the hot key list. The default
hot key is the F5 key.
5. Click Start to register the key combination. When
the key combination is registered, the Start button
changes to a Stop button. The key combination
remains registered only for the current session.
Press the Stop button to erase the hot key
combination.
6. Open your application, then open the document
or file that you want to capture. Press the hot key
combination that you specified. A screen capture
file is created.
You can make as many screen captures as you
like. Simply open the appropriate documents and
press the screen capture key combination for each
screen shot that you want to capture.
Note:
The saved screen capture files are displayed below
the Drive list box on EPSON File Converter's
Screen Shot menu.
Screen capture file names are created
automatically.
7. When you are finished making screen capture
files, close your application. Then click the Stop
button on the Screen Capture menu. The key
combination that you specified is cleared.
To upload your screen capture files to the memory
card in your camera, see "Using the Folder Menu" on
page 2-14.
Using the Included Utilities
3
3-11