Table of Contents
Advertisement
Attaching Grasscatcher
• Lift the rear discharge door and remove the rear mulching baffle from the mower. See Figure 5.
Rear Mulching Baffle
FIGURE 5
NOTE: Make sure that the cables are routed to the outside of the handle and out of the way when
attaching the grasscatcher.
• Place the hooks of the grasscatcher into the slots in the handle bracket assemblies on both sides.
See Figure 6. Release the rear discharge door.
• To remove the grasscatcher, lift the rear discharge door on the mower. Lift the grasscatcher up, out
of the slots in the handle bracket assemblies. Reinstall the plastic rear mulching baffle and release
the rear discharge door.
Lift discharge door
Pull grass bag
out and away
FIGURE 6
NOTE: For instructions on how to bag the grass clippings, please refer to page 13 of this manual.
,_
WARNING: Never operate the mower unless the hooks on the grasscatcher are seated in
the slots on the handle bracket assemblies, and the rear discharge door rests firmly
against the top of the grasscatcher.
Advertisement
Table of Contents
