Sears Craftsman 917.259011 Owner's Manual page 10

Table of Contents

Advertisement

=ill
ASSEMBLY
,,"CHECKLIST
BEFORE YOU OPERATE AND ENJOY YOUR NEW
TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE
THE BESTPERFORMANCEAND
SA TISFACTION FROM
THIS QUALITY PRODUCT.
PLEASE REVIEW THE FOLLOWING CHECKLIST:
,/
All assembly instructions have been completed.
,f
No remaining loose parts in carton.
€" Battery is properly prepared and charged. (Minimum
1 hour at 6 amps).
J
Seat is adjusted comfortably and tightened securely.
,I
All tires are properly inflated. (For shipping purposes,
the tires were overinflated at the factory).
,z
Be sure mower deck is propedy leveled side-to-side/
front-to-rear for best cutting results. (Tires must be
properly inflated for leveling).
,/
Check mower and drive belts. Be sure they are routed
properly around pulleys and inside all belt keepers.
Z" Check wiring. See that all connections are stilf secure
and wires are properly clamped.
J
Before driving tractor, be sure freewheel control is in
drive position.
WHILE LEARNING HOWTO USE YOUR TRACTOR, PAY
EXTRA A TTENTION TO THE FOLLOWING IMPORTANT
ITEMS:
#"
Engine oil is at proper level.
J
Fuel tank is filled with fresh, clean, regular unleaded
gasoline.
J
Become familiar with all controls - their location and
function. Operate them before you start the engine.
#"
Be sure brake system is in safe operating condition.
v"
It is important to purge the transmission before operat-
ing your tractor for the first time. Follow proper starting
and transmission purging instructions (See'q-o START
ENGINE" and "PURGE TRANSMISSION" in the Op-
eration section of this manual).
10

Advertisement

Table of Contents
loading

Table of Contents