Assembly And Installation; Unpacking Your Welder; Install The Ground Clamp - Sears Craftsman 934.20105 Owner's Manual

ASSEMBLY ANDINSTALLATION Page6
ASSEMBLY AND INSTALLATION
ELECTRIC SHOCK CAN KILL! To re-
duce risk of electric shock, DO NOT PLUG
WELDER IN TO AC POWER SOURCE UNTIL
TOLD TO DO SO later in this manual.
UNPACKING YOUR WELDER
1. Open the top of the shipping carton.
2. Remove any cartons or bags containing acces-
sories.
4. Lay out the parts and compare to following illus-
trations to familiarize yourself with the parts and
what they are called. This will help you when
reading the manual.
5. Grasp the top handle of the welder and lift the
welder out of the carton.
INSTALL THE GROUND CLAMP
Connect the ground clamp to the ground cable
(coming out of the front of the welder) according to
the instructions packaged with the ground clamp.
3. Open the cartons or bags packed with your
welder and inspecttheir contents for damage.
Report any missing or damaged items immedi-
ately!