Table of Contents
Advertisement
ASSE
BLY
Read these instructions
and this manual in its entirety
before you attempt to assemble or operate your new lawn
mower. Your new lawn mower has been assembled at the
factory with the exception of those parts left unassembled
for shipping purposes.
To ensure safe and proper opera-
tion of your lawn mower, all parts and hardware
you
assemble must be tightened
securely.
Use the correct
tools as necessary to ensure proper tightness.
All parts
such as nuts, washers, bolts, etc., necessary to complete
the assembly have been placed in the parts bag.
TO RE_,_OVE LAWN MOWER FROM
CARTON
o
Remove loose parts inciuded with mower.
o
Cut down two end corners of carton and lay end
panel down flat.
o
Remove atl packing
materials
except padding be-
tween upper and lower handle and padding holding
operator presence
control bar to upper handle.
•
Roll lawn mower
out of carton and check carton
thoroughly
for additional
loose parts.
HOWTO SET UPYOUR
LAWN
MOWER
UPPER HANDLE
LiFT UP
r_OWING
POSITION
LOWER HANDLE
HANDLE
PiN
FmG o 1
/
J
\
\
3-POSITION
NDLE
ADJ USTMENT
BRACKET
TO UNFOLD
HANDLE:
(See Figs. t & 2)
t&_PORTANT:
UNFOLD HANDLE CAREFULLY SO AS
NOT TO PINCH OR DAMAGE CONTROL CABLES,
o
Raise lower handle section to operating position and
squeeze the bottom ends of
lower handle towards
each other until the pin in handle can be inserted into
one of the three height adjustment holes.
°
Raise upper handle section to operating position, re-
move protective padding and tighten handle knobs
securely.
Remove any packing material from around control bar.
•
Your handies may be adjusted for your mowing com-
fort. Refer to Service and Adjustments section of this
manual
F_G, 2
6
Advertisement
Table of Contents
