Welcome to the Garden of GARDENA... Compliance with the enclosed operating instructions provided by GARDENA is a prerequisite for proper use of the Irrigation Valve. Please read these operating instructions carefully and observe the notes given. Use these operating instructions to familiarise...
Page 3
3. Screw the end cap onto the short telescopic pipe Connect GARDENA connect- You can use the GARDENA Connecting Pipe Art. No. 1580 / Assemble the The integrated solenoid valve only works correctly with the ing pipes to valve box : 1582 and GARDENA Hose Clips Art.
Hose clips are too loose. v Tighten hose clips (see “3. Assembly”). 4. Operation If other faults occur, please contact GARDENA Customer Service. Adjusting valve control : Fully Automatic Control : v Set selection lever to “AUTO / OFF”. 7. Protection against Frost Programme-controlled water flow to the watering system ac- cording to the programming in the Control Unit / Radio Receiver.
If a fault occurs with your Irrigation Valve, please return the faulty unit together with a copy of the receipt and a description of the fault, with postage paid to one of the GARDENA Service Centres listed on the back of these operating instructions.
Page 6
Deutschland Finland Norway GARDENA Kress + Kastner GmbH Habitec Oy GARDENA Norge A / S GARDENA Service Martinkyläntie 52 Postboks 214 Hans-Lorenser-Straße 40 01720 Vantaa 2013 Skjetten D-89079 Ulm France Poland Produktfragen: (07 31) 490 - 123 GARDENA France GARDENA Polska Sp. z o.o.