Table of Contents
Advertisement
4. Locate the PCI Express x 16 slot. If
necessary, remove the metal cover from this
slot; then align your graphics card with the
PCI Express x 16 slot, and press it in firmly
until the card is fully seated.
Warning!
When installing the graphics card, do
not push down the heat pipe. This
may displace the heat pipe and cause
bad contact between the graphics
chip and thermal pad as well as affect
the heat dissipation. To avoid system
instability, do not touch the graphics
card when it is runnnig .
5. Replace the screw to fasten the card in
place, and replace the computer cover.
6. Plug the flat panel display cable into your
card; then turn on the computer and monitor.
If you wish to connect a VGA monitor via the
adapter, connect the 15-pin display cable
of the VGA monitor to the VGA connector of
the adapter.
To Flat Panel Display
You are now ready to proceed with the installation of the graphics card drivers. Please
refer to next chapter for detailed instructions.
9-Pin for VIVO
- 7 -
Hardware Installation
Advertisement
Table of Contents
