Table of Contents
Advertisement
To install your new graphics card:
1. Locate the PCI Express x 16 slot. If
necessary, remove the metal cover from this
slot; then align your graphics card with the
PCI Express x 16 slot, and press it in firmly
until the card is fully seated.
2. Replace the screw to fasten the card in place,
and replace the computer cover.
3. Plug the flat panel display cable into your
card; then turn on the computer and monitor.
If you wish to connect a VGA monitor via the
adapter, connect the 15-pin display cable
of the VGA monitor to the VGA connector of
the adapter.
To TV or VCR
To Flat Panel Display
You are now ready to proceed with the installation of the graphics card drivers. Please
refer to next chapter for detailed instructions.
GV-RX60P128DE/GV-RX60P256DP Graphics Accelerator
To VGA Monitor
- 8 -
Advertisement
Table of Contents
