Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for CSE Systems 3880
- Page 1 ColorBurst RIP for Epson Stylus Pro Edition ® 3880 4880 7880 9880 GETTING STARTED...
-
Page 2: Getting Started
SpectralVision™ utility for printer linearization. Before setting up the ColorBurst RIP, see your Epson Stylus to set up the Epson Stylus Pro printer on the computer that will run the RIP server. To set up the RIP server, double-click the installer icon and follow the on-screen instructions. - Page 3 Note: The file names and paths may be slightly different, depending on your printer model. If you are using the Epson Stylus Pro 7880 or 9880 printer, you need to attach the included USB key to the computer that is running the RIP server.
- Page 4 The ColorBurst RIP print server name appears in the list. 7. Select the ColorBurst RIP print server name from the Bonjour printers. 8. Make sure ColorBurst Epson RIP Print Using list. 9. Click to add the printer. You see the ColorBurst RIP Print Server name in the printer list.
- Page 5 Mac OS X Clients Printing to a Windows RIP Server These instructions are for Mac OS X 10.4.x through 10.6.x. 1. Make sure your computer is connected to the same network as the ColorBurst RIP server computer. 2. Insert the ColorBurst RIP disc into your drive. 3.
- Page 6 9. Select the Windows computer name where the ColorBurst RIP is running. In 10.4.x, click 10. Select ColorBurst RIP Printer Model or Printer Using list. If you don’t see the ColorBurst RIP driver under the Printer Model or Print Using list, select Printers\PPDs\Contents\Resources and click (10.6 or 10.5.x) or...
- Page 7 Windows Clients Printing to a Windows RIP Server ColorBurst supports 32-bit versions of Windows 7, Windows Vista Windows XP. Other versions of Windows, including 64-bit versions, are not supported. Note: Make sure the ColorBurst RIP is shared on the server. 1.
- Page 8 6. If you want to use the ColorBurst RIP as your default printer, choose Set as the default printer checkbox or choose default printer 7. Click when you see a screen telling you that setup is complete. Finish You’re ready to print to the ColorBurst RIP. Windows Clients Printing to a Mac OS X RIP Server ColorBurst supports 32-bit versions of Windows 7, Windows Vista, and Windows XP.
- Page 9 6. Select the Local printer Automatically detect and install my Plug and Play printer unchecked. Then click 7. Click Create a new port Next 8. Windows 7 or Windows Vista: Uncheck automatically select the driver to use Windows XP: When you see the Add Standard TCP/IP Print Port Wizard screen, click 9.
- Page 10 12. Click Next 13. Windows 7 or Windows Vista: Click Windows XP: Click Port Wizard. 14. At the next screen, click 15. Browse to the folder that you unzipped and select 16. Click to return to the Open 17. Click 18.
- Page 11 General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. The contents of this manual are subject to change without notice.
- Page 14 Printed in USA CPD-25014R1...
Need help?
Do you have a question about the 3880 and is the answer not in the manual?
Questions and answers