Using Freecom Turbo Usb 2.0 (Only Pc) - Freecom Mobile Drive Secure User Manual

Chapter 5: Using Freecom Turbo USB .0 (only PC)
By installing the Turbo USB 2.0 driver for your Mobile Drive Secure, the data transfer rate
can be significantly increased (up to 40% faster transfer speed compared to standard
High-Speed USB).
Enabling the Turbo USB .0 driver
1. Connect the Freecom Mobile Drive Secure to your PC.
2. Run "Start.exe" from your Mobile Drive Secure and go to Software Installation ->
Freecom Turbo USB 2.0.
3. The Freecom Turbo USB 2.0 Wizard will open.
4. Check the drive and click on "Configure" to enable the Turbo USB2.0 driver for the
Freecom Mobile Drive Secure.
Disabling the Turbo USB .0 driver
1. Connect the Freecom Mobile Drive Secure to your PC.
2. Run "Start.exe" from your Mobile Drive Secure and go to Software Installation ->
Freecom Turbo USB 2.0.
3. The Freecom Turbo USB 2.0 Wizard will open. Uncheck the drive and click on "Configure"
to disable the Freecom Turbo USB 2.0 driver for the Freecom Mobile Drive Secure.

Using Freecom Turbo USB 2.0 (only PC)

EN
5
5