Display Screen - Panasonic Viera TC-P55VT30 User Manual

Network link
■
Edit the name of this TV
Sets your favorite name for this TV. This name
will be used to display the name of this TV on
the screen of the other Network compatible
equipment.
Select "VIERA network name"
Menu
Network link
VIERA network name
VIERA
DLNA remote control
DLNA remote volume control
Network remote control
Edit the name and press OK
Entering characters (p. 21)
Network cameras list
Before using a Network camera, you need to register the camera as shown below. You can also set
Default camera or Disconnect/Delete the registered cameras.
Press "Network cameras list" and

display screen

Set Network camera setting
Network cameras list
Camera name Model Status
Camera 1 BL-C210A Connected
... ...
...
... ...
...
... ...
...
... ...
...
... ...
...
... ...
...
... ...
...
Select OK
RETURN
Find cameras Delete
Disconnect Default camera
●
For this operation, please refer to the operating
manual for the Network camera.
Software update
Select "Software update"
Menu
Network settings
Connection test
Network connection
Wireless network
IP address/DNS settings
Network cameras list
Software update
Mac address
44
select
Enable
OK
Enable
Enable
select
Default
select
Wireless (WiFi)
OK
00-0b-97-7c-65-e9
■
Switches DLNA remote control (Disable/Enable)
Switches DLNA remote control "Disable" or "Enable"
DLNA remote control Enable
■
Volume setting in DMR operation (Disable/Enable)
Sets volume setting in DMR operation
• Available only when "Enable" is selected in "DLNA remote
control"
DLNA remote volume control Enable
■
Switches Network remote control (Disable/Enable)
Switches remote control of network device such as a
smartphone to "Disable" or "Enable".
Network remote control Enable
Start camera search.
●
Before you start to search for a camera, switch the
camera to registration mode.
●
Search condition also depends on "Network settings"
Delete camera information.
Disconnect to camera.
"Disconnected" will be displayed in "Status".
Set to default use.
Displayed "(Default)" next to camera name.
(Available only when reconnecting)
Connect to Camera. "Connect" will be displayed in
"Status".
Press OK to start the Software update screen
Follow directions on the screen
●
Set "Clock" first. (p. 17)
select
select
select