Advertisement
Note: If you are converting the toy from Sit &
Play mode to Stand & Dance, first turn the knobs
on each side of the keyboard to remove the leg
assemblies. Then, press the star buttons to remove
the supports from each leg.
Support
Star Button
1
•
While pressing the star button on a support, fit the
end of the support into the large slot in one of the
legs, as shown. Make sure you hear a "click".
•
Repeat this procedure to assemble the other
support and leg.
Assembly - Stand & Dance
Leg
Large Slot
2
•
Position the keyboard so it is facing up, as shown.
•
Align the
symbol on a leg assembly with the
arrow
on the keyboard.
•
Fit the leg assembly onto the side of the keyboard.
Knob
3
•
Turn the knob on the leg assembly to secure it to
the keyboard.
•
Repeat this procedure to assemble the other leg
assembly to the keyboard.
6
Advertisement
