Advertisement
Installation Guide
ANG-11xx Power Kit
The ANG-11xx Power Kit is designed to firmly secure the unit's power cord and
avoid disruption of service due to a disconnection. The cord is secured to the side
of the ANG-11xx with an adhesive clip, as shown in Figure 1. Simply attach the
clip an inch or so to the left of the power connector of the ANG-11xx. Then attach
the cord to the clip and plug into the unit.
Figure 1 Power Kit Installation
9038127
Page 1 of 2
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Enterasys ANG-11XX
Summary of Contents for Enterasys ANG-11XX
- Page 1 ANG-11xx with an adhesive clip, as shown in Figure 1. Simply attach the clip an inch or so to the left of the power connector of the ANG-11xx. Then attach the cord to the clip and plug into the unit.
- Page 2 Global Technical Assistance Center at 1-800-872-8440 or by sending E-mail to support@enterasys.com. Notice Enterasys Networks and its licensors reserve the right to make changes in specifications and other information contained in this document without prior notice. The reader should in all cases consult Enterasys Networks to determine whether any such changes have been made.
Need help?
Do you have a question about the ANG-11XX and is the answer not in the manual?
Questions and answers