FileMaker Server 11 Getting Started Manual page 18

18 FileMaker Server Getting Started Guide
23. Select a web server and click Next.
Note If the Deployment assistant fails to detect the web server, see chapter 6, "Setting up the web
server." Also be sure that the necessary firewall ports are open. See "Before you begin" on page 11.
Note To specify a web server later, select Skip this step and select a web server later and click Next.
24. If you see the following Web Server Test Failed step, the Deployment assistant detected but could not
communicate with the web server. Specify the Protocol, Host address, and Port for the web server and
click Retry. For more information, see "Troubleshooting" on page 43.