Table of Contents
Advertisement
ENVS800 / ENVS1600 / ENVS3200 Installation Manual
5.5.1.6 Focus lost event
Sensitivity
Interval
Ignore Lighting change
Start / Stop Simulation
Sensitivity of detection, moving slider to right increases
sensitivity, moving to left decreases sensitivity.
Filter function for detection. If slider is moved to right, a
longer period of unfocussed camera is needed to trigger
alarm.
With activated checkbox the event will not trigger, if a global
light change (turn light on / off) appears in the camera
picture.
With START SIMULATION you can test, if current settings
are correct.
Below the video window appears "Event detected". End the
simulation mode with "STOP SIMULATION".
49 of 115
Advertisement
Table of Contents
