Accessories; Location Planning; Connecting Cables - Enterasys ANG-1000 User Manual

Connecting Cables

The box contains a CD ROM with this instruction manual in the Adobe PDF
format, a Quick Setup card and accessories.

Accessories

The ANG-1000 also is shipped with the following accessories:

Location Planning

Place the ANG-1000 on a desktop near the following:
Connecting Cables
Ethernet cables are used to connect the ANG-1000 to your computer or LAN
and the Internet.
ANG-1000
4
H Two 10baseT cables (blue and orange) to connect to the LAN
ports/hub.
H One cross-over (red) cable for a direct PC/Network Gateway
connection.
H One power supply with an attached cable to connect to the
ANG-1000.
H One power cord to connect the power supply to the AC outlet.
H Ethernet wall jack, patch panel, or hub with available ports.
H Near a DSL or Cable modem.
H A grounded wall outlet or uninterruptible power supply (UPS).
Front
Figure 4 Front and Rear Views of the ANG-1000
ANG-1000
Rear
Aurorean Network Gateway-1000 User's Guide
Chapter 2
Installation