Power On Alert (When Using The Ac Adaptor); To Disable; Part 2 Basic Operations; To Switch Power On And Off - Casio CTK-520L Operation Manual

Power On Alert (when using the AC adaptor)
If you leave power on without performing any operation for about six minutes, all of
the keyboard keys light to alert you (no audible alarm sounds). Pressing any button
or keyboard key returns to normal operation with the keyboard in its initial power on
setting.
Notes
• The Auto Power Off function is invalid when the keyboard is powered by an
AC adaptor.
• The power on alert does not function when the keyboard is being powered by
batteries.
To disable auto power off and power on alert
While holding down the TONE button, turn keyboard power on. This disables the
auto power off and power on alert until you turn power off and then back on again.
E-16
Basic operations 1
This part of the manual provides you with the basic information you need to use your
keyboard.
• To switch power on and off
1. Set the POWER/MODE selector to NORMAL.
2. Press the keyboard keys.
3. The VOLUME up and down arrow buttons are used to adjust main volume.
• Pressing
_ or _ displays the currently set volume setting. Press
(_ or @ again to change the volume setting.
* Volume can be adjusted over a range of 0 (minimum) to 9 (maximum).
• Volume is set to 7 when the power is turned on.
• A setting of 0 turns down the volume completely.
• The volume can be changed continuously by continuously pressing
down the up or down buttons.
• Pressing the up and down buttons simultaneously sets the volume to
level 7.
• Numeric values can be entered directly with the 0-9 buttons after the
volume button has been pressed in step 3.
• The amount that the volume settings raises or lowers the volume level
differs according to the tone, auto accompaniment, or song you are
using.
4. To switch power off, set the POWER/MODE selector to OFF position.
• To change tones
1. Look at the tone list printed on the keyboard's console and find the one you want.
• A total of 100 tones are available.
2. Press the TONE button.
T_ • The number for the tone that is currently selected is
('_ shown on the display.
I OOI
Tone indicator
E-17