Canon PowerShot A520 User Manual page 52

Shooting - The Basics 1
O To shoot Bandscapes, swivel (pan) the
camera around its own vertical axis.
® To shoot close-ups, sRide the camera over
the subject, keeping it parallel to the subject
as you move it.
Shooting
Images can be shot in the following 2
sequences in Stitch Assist mode.
[_eft _ Right
iheftto riehthorizonta,y
LLeft _ Right JRight to left horizontally
/ /
t Turn the Shooting mode dia_ to
® The LCD monitor will turn on.
,2 Select the
shooting sequence
using the 4" or ¢,
button and press
the SET button.
® The shooting sequence is
set.
® You can also press the shutter button directly
to shoot without pressing the SET button,
3 Shoot the first image.
® The exposure and white balance settings are
set and locked with the first image,
4 Compose and
shoot the second
image so that it
overlaps the first.
® Minor discrepancies in
the overlapping portions
can be corrected when
the images are stitched
together,
® Use the _' or @ button to check or retake the
recorded images,
5' Use the same procedures to shoot
the remaining images.
® A maximum of 26 images can be recorded.
6 Press the SET button after the _ast
shot.
Sequence
5O