Lenovo ThinkServer RD230 Rack Installation Instructions page 3

Rail kit package
Before you begin the rack installation, remove all the parts from the rail kit package shipped with your
server and lay all the parts on a working surface.
The rail kit package contains the following parts. Contact your place of purchase if any part is missing or
damaged.
Figure 1. Parts in the rail kit package
1
Slide rails (2)
2
Screw bag marked with M5+WASHER (containing eight flat head M5 x 10 screws and eight washers)
3
Screw bag marked with M5X20L (containing two pan head M5 x 20 screws)
4
Screw bag marked with M4X4L (containing four flat head M4 x 4 screws)
M5+WASHER
M5X20L
M4X4L
3