Electrolux EI32AR65J S Product Specifications page 2

Built-In All Refrigerator
EI32AR65J S
32" Built-In All-Refrigerator Specifications
Product Weight – 240 Lbs.
•
An electrical supply with grounded three-prong receptacle is
•
required. The power supply circuit must be installed in accordance
with current edition of National Electrical Code (NFPA 70) and
local codes & ordinances.
Voltage Rating – 120V / 60 Hz / 20 Amps
•
Connected Load (kW Rating) @ 115 Volts = 0.55 kW
•
Amps @ 115 Volts = 5 Amps
•
Always consult local and national electric codes.
•
Minimum 25-1/4" depth requires recessed electrical outlet.
•
To allow for ease of installation, tape excess power cord to back of unit.
•
When installing refrigerator adjacent to wall, cabinet or other appliance
•
that extends beyond front edge of unit, 20" minimum clearance
recommended to allow for optimum 140° door swing, providing complete
drawer / crisper access and removal. (Absolute 4" minimum clearance will
ONLY allow for 90° door swing which will provide limited drawer / crisper
access with restricted removal.)
Refrigerator must be placed on level surface of hard material, same
•
height as flooring. Surface must support approximately 800 lbs. when
fully loaded. Unit equipped with 4-point leveling.
"Built-In Look" Specifications
Minimum opening of 72" H x 33" W x 25-1/4" D required for single-unit
•
"Built-In Look" installation; 66" W required for double-unit installation.
(72" H to be measured from finished floor to underside of soffit or
overhead cabinet.)
Electrolux Major Appliances, N.A.
10200 David Taylor Drive Charlotte, NC 28262
USA
• •
CANADA 5855 Terry Fox Way Mississauga, ON L5V 3E4
• •
EI32AR65J 09/12
1-877 -4electrolux (1-877 -435-3287)
• •
1-800-265-8352 electroluxappliances.ca
• •
© 2012 Electrolux Home Products, Inc.
Optional Trim Kit Specifications
For planning information, refer to model-specific Trim Kit Installation
pages on web.
Optional Trim Kits available for built-in installation with All Refrigerator
•
and/or All Freezer – requiring different cutout dimensions.
Designed as built-in replacement option for any model(s) having
•
pre-existing opening(s) with same cutout dimensions as stated for
specific Trim Kit or for new-build installation.
Remove all wall / floor molding prior to built-in installation.
•
For detailed Trim Kit installation, refer to instructions packed with kit
•
or on web.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxappliances.com for detailed instructions.
Optional Accessories
84" Louvered Trim Kits:
•
Single – (PN # ECP8436SS), Double – (PN # ECP8472SS).
72" Collar Trim Kits:
•
Single – (PN # ECP7236SS), Double – (PN # ECP7272SS).
79" Louvered / 75" Collar Trim Kits:
•
Single – (PN # TRIMKITSS1), Double – (PN # TRIMKITSS2).
PureAdvantage ® Air Filter
•
Replacement Cartridge – (PN # 241754001).
electroluxappliances.com
High standards of quality at Electrolux Home Products, Inc. mean
we are constantly working to improve our products. We reserve the right
to change specifications or discontinue models without notice.