Setting 3 - Sanyo PLC-XD2200 - XGA Able Multimedia Projector Owner's Manual

Setting 3

Item Description
Key lock .................. Sets the prohibition of controls either
Projector or Remote control. (OFF,
Projector keys, Remote control)
Fan control Sets the fan control speed.
.............
OFF
ON1
ON2
Lamp Corres.
Value(h) .................. Displays the lamp use time
(Corresponding value) . Reset the time
after lamp replacement. Click "Reset", a
confirmation display appears, and then
click "OK", the time will be reset.
Filter counter ...... Displays the filter counter. Reset the time
after filter clean-up. Click "Reset", a confirmation display appears, and then click "OK",
the time will be reset.
Filter warning..... Sets the time to indicate the filter warning message on the screen. (OFF, 100H, 200H,
300H)
Factory default ... Sets all of the projector control items to the factory default setting except the fol-
lowing items.
User Logo, Log PIN code lock, PIN code lock, Lamp Corres. Value, Filter counter, PJ
time, Network PIN code, Network setting
* This function is not effective for the settings of Network address settings, e-mail
settings, etc.
No show ................. Sets the black out image temporarily. (ON, OFF)
Freeze ...................... Sets the image to freeze mode. (ON, OFF)
Closed caption .. Sets the closed caption function.
Closed caption ... Sets the closed caption mode. (OFF, CC1, CC2, CC3, CC4)
Color ..................... Sets the color of the contents. (Color, White)
Normal mode
Highland mode 1
Highland mode 2
Setting up the projector
1