Stopping Monitoring The Target; Displaying All The Status Information Of The Target; Setting The Target Group - Sanyo PLC-XC56 - 3100 Owner's Manual

Chapter 3 Basic Operation

Stopping monitoring the target

To stop monitoring the target, click

Displaying all the status information of the target

Select a target and click
and displays all the available status information of the target.
0 The above procedure can perform by selecting Target display from Display menu.

Setting the target group

The target group can be set up by the procedure below. When you set a command in the
same group, you set it.
1
Select targets which you want to set from the status list. Select Group setting from
Target menu, the dialog box will appear as the below figure.
2
Select a group, and then click OK button.
The projectors setting different network passwords cannot be set to the same group. It is
0
necessary for the projectors in the same group to set to the same password.
1
button again on the tool bar.
button on the tool bar. The following status window appears
0 The target name and item which have an
abnormality or connection error happen-
ing are indicated with red.
0 When PJ Network Manager cannot
acquire the value of column information,
"---" is displayed.
"---" will not set the group.
0