Sanyo PLC-WL2500A Owner's Manual page 25

Network set-up and operation

Hide thumbs Also See for PLC-WL2500A:

Table of Contents

Crestron control

You can use Crestron RoomView® to monitor

and control the projector through the net-

work.

For more information, visit http://www.crest-

ron.com & www.crestron.com/getroomview.

Item

IP Address ................................ Control System IP Address

IP ID .............................................. Control System IP ID as a

Port................................................ The default value is

AMX D.D.

If your network environment uses an AMX con-

troller, select ON to allow the projector to be

detected by AMX Device Discovery. (ON, OFF)

For more details, visit http://www.amx.com/.

Description

as a string. The default

value is blank.

string. The default value

is blank. (from 3 to 254)

41794.( from 1 to 65535)

Network configuration

Table of Contents