Table of Contents
Advertisement
Maunal Keystone
Adjust image distortion caused by tilting projection. (±40 degrees) (for
X1161P/X1261P series only)
<Note> The Manual Keystone function is unavailable under Auto
Keystone setting to "On".
(for X1161P/X1261P series only)
Aspect Ratio
Use this function to choose your desired aspect ratio.
•
•
•
Sharpeness
Adjusts the sharpness of the image.
•
•
H. Position
•
(Horizontal
•
position)
V. Position
•
(Vertical position)
•
Frequency
"Frequency" changes the projector's refresh rate to match the
frequency of your computer's graphics card. If you can see a vertical
flickering bar in the projected image, use this function to make the
necessary adjustments.
Tracking
Synchronizes the signal timing of the projector with the graphics card.
If you experience an unstable or flickering image, use this function to
correct it.
Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions
are not supported under HDMI or Video mode.
Auto: Keep the image with original width-higth ratio and maxi
mize the image to fit native horizontal or vertical pixels.
4:3: The image will be scaled to fit the screen and displayed using
a 4:3 ratio.
16:9: The image will be scaled to fit the width of the screen and
the height adjusted to display the image using a 16:9 ratio.
Press
to decrease the sharpness.
Press
to increase the sharpness.
Press
to move the image left.
Press
to move the image right.
Press
to move the image down.
Press
to move the image up.
21
Hide quick links:
Advertisement
Table of Contents
