Panasonic VIERA TC-L32C3 Owner's Manual page 13

Auto channel setup (ANT/Cable setup)
Select the connected Antenna in terminal
Not used: Go to _)
(Labelinputs)
Select "Not used" when no wire is connected to the "Antenna/Cable" terminal.
® Typical when a Cable/Satellite box is connected to a TV AV input.
® Prevents accidental tuning to an unavailable signal, when Cable or Satellite box is
used.
Select "Start"
)select
Skip: Go to Q
(Labelinputs)
Start scanning the channels
(Available channels are automatically set.)
This process may take up to 20 minutes.
® This step is not needed when a Cable or Satellite
box is connected to an AV input.
@
77
m,
_--!..
q
¢D
03
"0
• Press to go back to
the previous screen
RETURN
@
® About broadcasting
systems
Analog (NTSC):
Conventional
broadcasting
Digital (ATSC):
New
programming
that allows
you to view
more channels
featuring
high-quality video
and sound
_ Complete the Auto program setup
Completion message is displayed when the Auto program scan is successfully
completed.
If there is no available
- OK channel, return to @ -
(ANT/Cable setup).
"Not used" will be selected.
• Operation of the EXIT button during "First time setup"
Press the button once to display confirmation screen. Press again to close
confirmation screen.
[EXIT confirmation screen]
Yes _ Exit "First time setup"
No _ Return to the original screen.
I
13
tc_L32_c3_eng_Oa91.indb 13 2011/01/05 11:11:3(
I