Vantec UGT-IH100 Installation Manual

Multi-function front panel usb2.0/firewire 400/esata

Advertisement

Quick Links

Multi-function Front Panel USB2.0/Firewire
400/eSATA
Model No.: UGT-IH100
Installation Guide
v1.01
1

Advertisement

Table of Contents
loading

Summary of Contents for Vantec UGT-IH100

  • Page 1 Multi-function Front Panel USB2.0/Firewire 400/eSATA Model No.: UGT-IH100 Installation Guide v1.01...
  • Page 2: Prescribed Use

    All rights reserved. System Requirement • Microsoft Windows XP/Vista/7(32/64 Bit) • Mac OS x 10.4+ Package Content: • Vantec Multi-function Front Panel USB2.0/Firewire 400/eSATA • 3.5’’ to 5.25’’ Mounting Bracket • Installation Guide • Installation Screws Installation...
  • Page 3 and all connected devices. Proceed with caution. Danger to life! Switch off the computer in which the product is to be installed and all connected devices. Disconnect all devices from the mains voltage and pull out the mains power supply plug! Just turning off at the on/off switch is not enough! •...
  • Page 4 unit, loss of warranty! The red line is the +5V line of the 5-pole USB plug. It must be in accordance with the +5V connector of the USB port of the motherboard. • Identify where the FireWire port is on the motherboard, and then please connect the 6 pins.
  • Page 5 Tips & Notes a) In general • The integrated USB2.0-Hub is automatically recognized and is integrated into the operating system. The required drivers are already components of the operating system. This is why there is no driver CD included and no separate driver installation is necessary.
  • Page 6 • With certain 1394 and USB2.0 devices (e.g. external hard discs) an icon with an arrow is displayed in the menu bar. Via this function the 1394 or USB2.0 device can be “separated” from the PC and therefore tell the PC to close open files. •...
  • Page 7: Warranty

    other. For this reason, only one of the two connectors may be used at the same time! d) eSATA • Contrary to USB/Firewire, with eSATA it might be possible that an external hard disc is not recognized when connected during running operation.
  • Page 8 Also, check for any cosmetic flaws. If any parts are missing or if there are cosmetic defects, please contact the retailer from which you purchased the unit immediately and ask for a replacement. Contact: Vantec Thermal Technology www.vantecusa.com...

Table of Contents