LG 42PC5DC - - 42" Plasma TV Owner's Manual page 112

-O
-O
m
Z
C7
X
110
01. Power (Command: k a)
To control Power On/Off of the TV.
Transmission[k] [a][] [Set!D][ ] [Data] [Cr]
Data 00: Power Off Data 01 :Power On
Acknowledgemen_ [a][] [Set ID][] [OKiNG] [Data] [x]
* In a like manner, if other functions transmit 'FF' data
based on this format, Acknowledgement data feedback
presents status about each function.
* Note: In this model, TV will send the Acknowledge
after power on processing completion.
There might be a time delay between command and
acknowledge.
02.
Input Select (Command: x b)
To select input source for TV.
TransmisSiOn [x] [b][ ][Set ID][ ][Data] [Cr]
Data 00: DTV (Antenna) Data 01 : DTV (Cable)
Data 10: Analog (Antenna) Data 11: Analog (Cable)
Data 20:AV1 Data 21 : AV2
Data 40: Component 1 Data 41: Component 2
Data 60: RGB-PC Data 90:HDMI1
Data 91:HDMI2 Data 92:HDMI3
Data 93: HDMI4(Only 42/50PQ60, 50/60PS60, 50/60PS60C)
Acknowledgemen_ [b][ ][Set ID][ ][OKiNG] [Data] [x]
03.
Aspect Ratio (Command: k c)
To adjust the screen format.
Transmission [k] [C][] [set ID][] [Data] [Cr]
Data 01 : 4:3 09: Just scan
02:16:9 1.[3:Cinema Zoom (1)
04: Zoom
06: Set by program 1 f: Cinema Zoom (16)
Acknowledgemen_ [c][] [Set ID] [ ] [OK/NG] [Data] [x]
04.
Screen Mute (Command: k d)
To select screen mute on/off.
Transmission[k] [d][ ] [Set ID][] [Data] [Cr] ....
Data 00: Screen mute off (Picture on), Video-Out Mute Off
Data 01 : Screen mute on (Picture off)
Data 10: Video-Out Mute On
Acknowledgement[d][] [Set ID][] [OK/NG] [Data] [x]
* In case of Video-Out mute on only, TV will display On
Screen Display(OSD). But, In case of Screen Mute On,
TV will not display OSD.
05. Volume Mute (Command: k e)
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
TransmisSiOn [k] [e][ ][Set ID][ ][Data] [Cr]
Data 00: Volume mute on (Volume off)
Data 01: Volume mute off (Volume on)
06.
07.
08.
09.
Acknowledgemen_ [e] [ ] [set ID] [ ] [OKiNG] [Data] [x]
Volume Control (Command: k f)
To adjust volume.
You can also adjust volume with the volume buttons on
remote control.
TransmisSiOn [k] [f] [] [Set ID] [ ] [Data] [Cr]
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to 'Real data mapping'.
Acknowledgement[f] [ ][Set ID][ ] [OKiNG] [Data] [x]
Contrast (Command: k g)
To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission[k] [g][] [Set ID] [ ] [Data] [Cr]
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
_Refer to 'Real data mapping'.
Acknowledgement [g][] [Set ID] [ ] [OK/NG] [Data] [x]
Brightness (Command: k h)
To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission[k] [h] [ ] [Set ID] [ ] [Data] [Cr]
Data Min: 00 _ Max: 64 (*transmit by Hexadecimal code)
_Refer to 'Real data mapping'.
Acknowledgement [h][ ][set ID][ ][0K/NG] [Data] [x]
Color (Command: k i)
To adjust screen color.
You can also adjust color in the PICTURE menu.
TransmisSiOn [k] [i][ ][Set ID][ ][Data] [Cr]
Data Min: 00 _ Max: 64 (*transmit by Hexadecimal code)
*Refer to 'Real data mapping'.
ACknowledgement[i][ ][Set ID][ ][OKZNG] [Data] [x]
10.
11.
Tint (Command: k j)
To adjust screen tint.
You can also adjust tint in the PICTURE menu.
Transmission [k] [j][] [Set ID] [ ] [Data] [Cr]
Data Red: 00 _ Green: 64 (*transmit by Hexadecimal code)
_Refer to 'Real data mapping'.
Acknowledgement[ill] [Set ID] [ ] [OKiNG] [Data] [x]
Sharpness (Command: k k)
To adjust screen sharpness.
You can also adjust sharpness in the PICTURE menu.
TransmisSiOn[k] [k][] [set ID][] [Data] [Cr]
Data Min: 00 _ Max: 64 (*transmit by Hexadecimal code)
*Refer to 'Real data mapping'.
Acknowledgemen_ [k][ ][Set ID][ ][OK/NG] [Data] [x]