Using The Metronome - Yamaha piaggero NP-11 Owner's Manual

Using the Metronome

This instrument features a built-in metronome (a device that keeps an accurate tempo) that is convenient for prac-
ticing.
1
Press the [METRONOME ON/OFF]
button to start the Metronome.
2
Press the [METRONOME ON/OFF]
button to stop the Metronome.
Setting the Beat
While holding down the [METRONOME ON/OFF] button, use the BEAT [<]
button or the BEAT [>] button to select the Beat from 0, 2, 3, 4, 5 and 6.
The first Beat is accented with a bell sound and the rest with clicks. The
default setting is 0. In this setting, clicks sound for all beats.
The beat can also be changed by the following operation.
While holding down the [METRONOME ON/OFF] button, press one of the
keys C3 – F3.
Adjusting the Tempo
While holding down the [METRONOME ON/OFF] button, use the TEMPO
[t] or [s] button to decrease or increase in single steps.
While holding down the [METRONOME ON/OFF] button, press both
TEMPO [t]/[s] buttons simultaneously to restore the default tempo.
14
NP-31/NP-11 Owner's Manual
NP-31
NP-11
C1 C2 C3 F3
TERMINOLOGY
Default setting:
The "Default setting" refers to the factory
setting obtained when you first turn on the
power to the instrument.
Key Beat
C3 0
C#3 2
D3 3
D#3 4
E3 5
F3 6
NOTE
Setting range: q = 32 – 280
NOTE
Default setting: 120