Panasonic TC-P42S2 Operating Instructions Manual page 27

42/46/50/54" class 1080p plasma hdtv
Hide thumbs Also See for TC-P42S2:
Table of Contents

Advertisement

(Continued)
• Menu list
Menu
Item
Adjustments/Configurations
(alternatives)
Sets the mode to select
the channel
with the Channel
up/down
button
Channel
surf
mode
(All/Favorite/Digital
only/Analog
only)
¢ Favorite:
Only channels
registered
as FAVORITE.
(p. 18)
Language
Selects
the screen
menu language.
Clock
Adjusts
the clock. (p. 16)
ANT/Cable
setup
Sets channels.
(p. 36)
Input
labels
Selects
the terminal
and label of the external
equipment.
(p. 39)
Prevents
"image
retention"
with Wobbling.
(Automatic/Periodic)
Automatic:
Shifts the display
image automatically.
Pixel
orbiter
Periodic:
Shifts the display
image every
(1/2/3/4)
minutes
according
to what was set in
the "Time (minutes)"
menu.
Time
(minutes)
Sets the time for the "Pixel orbiter-Periodic"
setting.
(1121314)
4:3 side
bars
Changes
the brightness
of the side bar (OfflDarklMidlBright)
(4:3 mode only)
® The recommended
setting
is "Bright" to prevent the panel
"Image retention".
(p. 46)
Scrolling
bar
Press "OK" to start the horizontal
"Scrolling"
on the screen.
(p. 46)
Controls
the equipment
connected
to HDMI terminals.
(Off/On)
(p. 30)
VlERA
Link
_ "Power
off link", "Power
on link", "Energy
saving
mode",
"Unselected
device energy
save"
and "Default
speakers"
cannot
be selected
if "Off" is set.
Power
on
link
Sets "Power
on link" of the HDMI connected
equipment.
(No/Yes)
(p. 30)
Power
off
link
Sets "Power
off link" of the HDMI connected
equipment.
(No/Yes)
(p. 30)
Energy
saving
Sets "Energy
saving
mode" of the HDMI
connected
equipment.
(Quick
start/Save)
(p. 30)
mode
Unselected
clevice
Sets "Unselected
device
energy
save" of the HDMI connected
equipment.
(p. 30)
energy
save
(No (stay on)/Yes
(with prompt)/Yes
(no prompt))
Default
speakers
Selects
the default speakers.
(TV/Theater)
(p. 30)
To conserve
energy,
the TV automatically
turns off when NO SIGNAL
and NO OPERATION
continue
for more than 10 minutes.
(Stay on/Power
TV off)
Note
® Not in use when "Auto power on", "On/OffTimer"
or "Lock" is set, or while "SD mode" or "Digital
Channel"
is selected.
® "No signal for 10 minutes was activated"
will be displayed
for about 10 seconds
when the TV
is turned on for the first time after the power was turned off by "No signal for 10 minutes".
® The on-screen
display
will flash 3, 2 and 1 to indicate
the last three
(3) remaining
minutes
prior to the shut-off.
To conserve
energy,
the TV automatically
turns off when no operation
of remote
and side
panel
key continues
for more than 3 hours.
(Stay
on/Power
TV off)
Note
® Not in use when
"Auto power on" or "On/Off Timer" is set.
® "No activity
for 3 hours was activated"
will be displayed
for about
10 seconds
when
the TV
is turned
on for the first time after the power was turned
off by "No activity
for 3 hours".
® The on-screen
display
will flash 3, 2 and 1 to indicate
the last three
(3) remaining
minutes
prior to the shut-off.
Turns TV On automatically
when the cable box or connected
device
is turned
On (No/Yes)
TVAC
cord must be plugged
into this device. TV turns on every
time the power is restored.
® The "Sleep" timer, "On / Off timer", and "First time setup" will not function if "Auto power on" is set. (p. 40)
Sets the "Thumbnail"
or "Slideshow"
to play back SD cards automatically.
Slideshow/Thumbnail/Set
later/Off)
Restarts
the first time setup from "Language"
setting.
(p. 14)
Displays
TV version
and software
license.
Performing
Reset will clear all settings
made with Setup,
such as channel
settings.
(p. 36)
<
r-
2
O_
No signal for 10
_
minutes
_3
<
_'
No activity for a
hours
_ _ Auto power on
Image viewer
auto play
First time setup
About
Reset to defaults
• Sub menu
list
Menu
Item
Adjustments/Configurations
(alternatives)
Sets the mode to select the channel with the Channel up/down button
Channel
surf mode
(All/Favorite/Digital
only/Analog only)
Set favorite
Sets favorite channels. (p. 19)
Edit CH caption
Changes the station identifier.(p. 37)
Signal meter
Checks the signal strength if interference or freezing occurs on a digital image. (p. 37)
®
A-r"
'oo
Pc
c)..
t-
_) "T]
_---:t-
_...-.O0
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents