Panasonic Viera TC-P42X3 Owner's Manual page 13

irst Time
etup
The first time setup screen is displayed only when the TV is turned on for the first time after the power cord
is inserted into a walt outlet and when "Auto power on" (p. 48) is set to "No".
Turn the TV On with the POWER button
(TV) (Remote)
POWER
POWER
or
Configure your viewing mode
_i_Select your language
@)Select your country
_3_ S elect your viewing mode (Be sure to select "Home use")
® Please confirm your selection (Home Use) before pressing OK button.
[] If you select "Store Demonstration" by mistake in _3),
confirmation screen will be displayed.
® Select "No" and return to previous screen (_.
® if you select "Yes", Screen enters the store demonstration mode.
To display the "Set viewing mode" screen again as shown above and
select "Home Use", do one of the following:
• Press and hold down the side POWER button for at least five seconds.
• Unplug power cord for 30 seconds and plug it again.
® If you use any other step other than _# then turn the TV off, or if you used
the EXIT button to quit before completing the settings, the next time you turn
the TV on, "First time setup" will not be automatically displayed.
• The settings up to that point are saved.
° You can start "First time setup". (p. 48)
® Language, ANT/Cable setup, Input labels, Clock can also be changed from
the Settings Menu. (p. 48)
®®
__m
(bOo
o_
q--o
o
GO
13