Turning On Tv; Channelselection; Volumeadjustment - LG 42PQ20 Owner's Manual

WATCHING TV / CHANNEL CONTROL
N
-r"
z
<
N
I
>
z
z
fT1
N
©
Z
©
TURNING ON TV
Turning on TV just after installation
@
@
First, connect power cord correctly.
At this moment, TV is in standby mode.
In standby mode to turn TV on, pressthe INPUT, CH (A or • ) button on the TV or pressthe POWER,INPUT,
CH(^ or v ), Number (0~9) button on the remote control.
Select the viewing source by using the INPUT button on the remote control.
01_ This TV is programmed to remember which power state it was last set to, even if the power cord is out.
Turning on TV in use (power cord is still connected)
Case 1) Press the POWER button on the remote control. The TV reverts to standby mode.
- To turn TV on, press the INPUT, CH (A or •) button on the TV or press the POWER, INPUT,
CH(^ or v),Number (0~9) button on the remote control.
You can press the main power to shutdown the TV from standby mode to use even less power that
standby mode.
Case 2) Main power((5/I) on the TV is switched off.
- To turn TV on, you must press the main power ( d)/I ) button on the TV.
Case 3) Press the POWER button on the remote control and then main power((b/I) on the TV is switched off.
- To turn TV on, you must press the main power ((5/I) button on the TV.
CHANNELSELECTION
Press the CH ( ^ or v ) or NUMBER buttons to select a channel number.
VOLUMEADJUSTMENT
Adjust the volume to suit your personal preference.
Press the VOL (+ or -) button to adjust the volume.
If you want to switch the sound off, press the MUTE button.
You can cancel the Mute function by pressing the MUTE or VOL (+ or -) button.
34