Gigabyte GA-8I915G Pro User Manual page 38

Onboard LAN Boot ROM
This function decide w hether to inv oke the boot ROM of the onboard LAN chip.
Enabled Enable this func tion.
Disabled Disable this function. (Default v alue)
Onboard Serial P ort 1
Auto BIOS w ill automatically setup the port 1 address.
3F8/ IRQ4 Enable onboard Serial port 1 and address is 3F8. (Default v alue)
2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8.
3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8.
2E8/ IRQ3 Enable onboard Serial port 1 and address is 2E8.
Disabled Disable onboard Serial port 1.
Onboard IrDA Port
Auto BIOS w ill automatically setup the IrDA port address.
3F8/ IRQ4 Enable onboard IrDA port and address is 3F8/ IRQ4.
2F8/ IRQ3 Enable onboard IrDA port and address is 2F 8/IRQ3. (Default v alue)
3E8/ IRQ4 Enable onboard IrDA port and address is 3E8/ IRQ4.
2E8/ IRQ3 Enable onboard IrDA port and address is 2E8/ IRQ3.
Disabled Disable onboard IrDA port .
UART Mode Select
This item allow s y ou to determine w hich Infra Red(IR) function of Onboard I/O chip.
ASKIR Set onboard I/O chip UART to ASKIR Mode.
IrDA Set onboard I/ O chip UART to IrDA Mode. (Default v alue)
UR2 Dupl ex Mode
This feature allow s y ou to sec lect IR mode.
This function w ill av ailable w hen "UART Mode Select" doesn't set at Normal.
Half IR Function Duplex Half. (Default v alue)
Full IR F unction Duplex F ull.
Onboard Parallel port
Disabled Disable onboard LPT port.
378/IRQ7 Enable onboard LPT port and address is 378/IRQ7. (Default v alue)
278/IRQ5 Enable onboard LPT port and address is 278/IRQ5.
3BC/IRQ7 Enable onboard LPT port and address is 3BC/IRQ7.
Paral lel Port Mode
SPP Using Parallel port as Standard Parallel Port. (Default v alue)
EPP Using Parallel port as Enhanced Parallel Port.
ECP Using Parallel port as Extended Capabilities Port.
ECP+EPP Using Parallel port as ECP & EPP mode.
ECP Mode Use DMA
3 Set ECP Mode Use DMA to 3. (Default v alue)
1 Set ECP Mode Use DMA to 1.
GA-8I915G Pro Motherboard - 38 -