3.9 DOE cu. ft. capacity washer with stainless steel basket
Dimensions and Installation Information (in inches)
Circuit Requirements: An individual, properly-grounded branch
circuit, with a three-prong grounding-type receptacle, protected
by a 15 or 20 amp circuit breaker or a time-delay fuse, is required.
Electrical Rating: 120V, 60Hz, 10A
Note: Washer wall outlet must be located within 36" of service
code entry. Wall outlet must not be located behind dryer.
Installation Information: Before installing, consult installation
instructions packed with product for current dimensional data.
For answers to your Monogram,
Series or GE
appliance questions, visit
our website at geappliances.com or call
GE Answer Center
Specification Revised 4/13