Table of Contents
Advertisement
Problem
Remnants of deter-
gent are building
up in the detergent
drawer.
The rinse water is
cloudy.
When pressing
a programme op-
tion button,
the corresponding
indicator does not
light up.
Possible cause
The water tap is not fully
opened.
The inlet hose filter in the in
coupling of the inlet hose at
the tap is blocked.
The cause is probably a deter-
gent with a high silicate con-
tent.
The selected programme op-
tion cannot be combined with
the set programme.
Operating Instructions
Remedy
Open the water tap fully.
Close the water tap. Unscrew
the inlet hose from the water
tap and from the machine.
Clean the filter.
This has no negative effects on
rinse results; use a liquid de-
tergent if necessary.
Make another selection.
31
Advertisement
Table of Contents
