Scan; Cd Operation; Switching To Cd Mode; Selecting Tracks - Dynex IN-CS101 Owner's Manual

OPERATION
stereo mode. You can sometimes
improve reception of distant stations by
selection mono operation.

SCAN

Press SCN button (19) to set the
function to scan mode, which scanning
to higher frequency
receivable signal and keep on each
station for several seconds.

CD OPERATION

SWITCHING TO CD MODE

If there is no CD inserted in the driver:
Gently insert the CD with the printed
side uppermost
compartment until you feel some
resistance. The CD is drawn into the
driver automatically.
begins.
If a CD is already inserted in the driver:
Keep pressing MOD button (6) shortly
until the CD mode display appears.

SELECTING TRACKS

Press TUN/TRK
TUN/TRK
the previous track or the following track.
Track number shows on display.
Hold TUN/TRK
TUN/TRK
reverse or fast forward. CD play starts
from when you release the button.

PAUSING PLAYING

Press PAU button (20) to pause CD
player. Press it again to resume play.

PREVIEWING ALL TRACKS

Press SCN button (21) to play first
several seconds of each track on the
current disc. Press again to stop intro
and listen to track.

REPEATING THE SAME TRACK

Press RPT button (22) to continuously
repeat the same track. Press it again to
stop repeat.
station
into the
CD playback
button (16) or
button (17) to move to
button (16) or
button (17) to fast

PLAYING ALL TRACKS IN RANDOM

Press SHF button (23) to play all tracks
on CD in random order. Press again to
cancel the function.

EJECTING A DISC

with
Press
and eject the disc from the disc slot (5).
Note: When you first play a CD and when
whichever track is playing, press M5 button
(24) or M6 (25), the unit will search the disc
again and start to play the first track. Later,
there is no function of pressing M5 button
(24) or M6 button (25).
CD
CDC OPERATION (FOR CDC VERSION
ONLY)
You can connect a CD changer to the unit
with CDC operation version only.
Information on handling CDs, inserting
CDs and operating the CD changer can be
found in the operating instructions supplied
with your CD changer.

SWITCHING TO CDC MODE

Keep pressing MOD button (6) shortly
until the CDC mode display appears.
Playback begins with the first CD that
the CD changer detects.
SELECTING TRACKS
Press TUN/TRK
TUN/TRK
the previous track or the following track.
Track number shows on display.
Hold TUN/TRK
TUN/TRK
reverse or fast forward. CD play starts
from when you release the button.
PAUSING PLAYING
Press PAU button (20) to pause CD
player. Press it again to resume play.
PREVIEWING ALL TRACKS
Press SCN button (21) shortly to play
first several seconds of each track on
13
button (4) to stop CD playing
button (16) or
button (17) to move to
button (16) or
button (17) to fast