Table of Contents
Advertisement
09. Color
(Command:
k i)
To adjust screen color.
You can also adjust color in the PICTURE menu.
TransmiSsiOn[k][i][
][Set
ID][
][Data][cr]
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to 'Real data mapping' as shown below.
ACknowledgemen_
[i] [ ] [set ID][
] [OK/NG]
[Data] [x]
14. Treble
(Command:
k r)
To adjust treble.
You can also adjust treble in the AUDIO menu.
TransmissiOn [k] [r][
][set
ID][
][Data]
[cr]
Data Min: O0 - Max: 64 (*transmit
by Hexadecimal code)
*Refer to 'Real data mapping' as shown.
ACknoWledgemenf [r][
][Set ID][
][OK/NG]
[Data] [x]
10. Tint (Command:
k j)
To adjust screen tint.
You can also adjust tint in the PICTURE menu.
Transmission [k] [j][
] [Set ID][
] [Data] [Cr]
Data Red: O0 _ Green: 64 (*transmit by Hexadecimal code)
_Refer to 'Real data mapping' as shown below.
Acknowledgement [j
] [] [set ID][]
[OKiNG]
[Data] [x]
15. Bass (Command:
k s)
To adjust bass.
You can also adjust bass in the AUDIO menu.
Transmission[k]
[s][
1[Set ID] [ 1 [Data] [Cr]
Data Min: 00 _ Max: 64 (*transmit
by Hexadecimal code)
*Refer to 'Real data mapping' as shown below.
ACknowledgement
[s][ ] [Set ID][ ] [OK/NG] [Data] [x]
11. Sharpness
(Command:
k k)
To adjust screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission [k] [k][]
[Set ID][]
[Data] [Cr]
Data Min: O0 _ Max: 64 (*transmit by Hexadecimal code)
*Refer to 'Real data mapping' as shown below.
Acknowledgement[k]
[]
[Set ID][]
[OKiNG]
[Data] [x]
16. Balance
(Command:
k t)
To adjust balance.
You can also adjust balance in the AUDIO menu.
TransmiSsiOn [k] [t] [ ] [Set ID] [ ] [Data] [Cr]
Data Min: O0 _ Max: 64 (*transmit
by Hexadecimal code)
*Refer to 'Real data mapping' as shown below.
Acknowledgement[t][
][Set ID][
][OKiNG]
[Data] [x]
12. OSD Select
(Command:
k I)
To select OSD (On Screen Display) on/off.
TransmissiOn [k] [I][]
[Set !D][
] [Data] [Cr]
Data 00: OSD off
Data 01 : OSD on
Acknowledgemen_ [I] [ ] [Set ID] [ ] [OK/NG]
[Data] [x]
1 3. Remote
Control
Lock Mode
(Command:
k m)
To lock the remote control
and the front
panel controls
on the set.
Transmission [k] [m][
][Set
ID][
][Data]
[Cr]
..................
Data 00: Lock off
Data 01 : Lock on
ACknowledgemenf [m][]
[Set ID][]
[OK/NG]
[Data] [x]
If you're
not using the remote control
and front
panel
controls
on the TV, use this mode. When main power is
on/off,
remote control
lock is released.
1 7. Color Temperature
(Command:
k u)
To adjust color temperature.
You can also adjust color temperature in the PICTURE menu.
TransmissiOn[k] [u][]
[Set ID] [] [Data] [Cr]
Data 00: Medium
01: Cool
02: Warm
Acknowledgement[u][]
[Set I D] [ ] [OK/NG] [Data] [x]
*Real data mapping
0 : Step 0
A : Step 10 (SET ID 10)
F : Step 15 (SET ID 15)
10 : Step 16 (SET ID 16)
63 : Step 99 (SET ID 99)
64 : Step 100
Z
E_
X
111
Hide quick links:
Advertisement
Table of Contents
