Reversing The Door Position; Tools Required - Emerson CR519B Owner's Manual

REVERSING THE DOOR POSITION

To avoid injury to yourself and/or property, we recommend someone assist you during the door
reversal process.
• Ensure the Appliance is unplugged and empty.
• Adjust the two leveling feet to their highest
position.
• We recommend you have someone to assist
you.
• 8mm socket screw driver
• Phillips style screw driver
1. Upper Hinge Bracket
2. Adjustable Leveling Foot
3. Machine Screw
1
Remove the upper hinge cover, then unscrew the upper screws of metal hinge bracket and take off
the hinge. Then take off the left side screw cover. Pull the appliance door upward to take it off.
2
Remove left leveling foot and the bottom hinge bracket by unscrewing the mounting screws.
At the same time, remove the mounting screws next to left leveling foot .
NOTE:
. To take the door off it is necessary to tilt the
Appliance backward. You should rest the
Appliance on something solid, e.g. a chair just
below the top panel.
DO NOT lay the Appliance completely flat as
this may damage the coolant system.
4. Bottom Hinge Bracket
5. Level Foot