Table of Contents
Advertisement
Item
V POSITION
H POSITION
(continued on next page)
Using the ◄/► buttons adjusts the vertical position.
Down ó Up
• Over-adjusting the vertical position may cause noise to appear on
the screen. If this occurs, please reset the vertical position to the
default setting. Pressing the RESET button when the V POSITION
is selected will reset the V POSITION to the default setting.
• When this function is performed
signal,
the range of this adjustment depends on OVER SCAN (30)
setting. It is not possible to adjust when OVER SCAN is set to 10.
• This function is unavailable for a signal from the HDMI port.
Using the ◄/► buttons adjusts the horizontal position.
Right ó Left
• Over-adjusting the horizontal position may cause noise to appear on
the screen. If this occurs, please reset the horizontal position to the
default setting. Pressing the RESET button when the H POSITION is
selected will reset the H POSITION to the default setting.
• When this function is performed
signal,
the range of this adjustment depends on OVER SCAN (30)
setting. It is not possible to adjust when OVER SCAN is set to 10.
• This function is unavailable for a signal from the HDMI port.
Description
on a video signal or an s-video
on a video signal or an s-video
IMAGE menu
31
Advertisement
Table of Contents
