Directed Electronics SIR-WRS1 User Manual page 20

Sirius echo signal repeater system
Table of Contents

Advertisement

Problem
(continued from previ-
ous page)
SIRIUS radio displays,
"Acquiring Signal"
SIRIUS radio displays
"Antenna Not Detected"
20
2 Reduce the distance between the Echo Transmitter and Echo Antenna, or ad-
just the location of one or both units until the signal strength on your SIRIUS
radio is good and the audio from it is acceptable. Materials used in the con-
struction of your home and/or proximity to other 900 MHz products may have
an adverse effect on the range of the SIRIUS Echo Signal Repeater System.
1 Verify that the SIRIUS home antenna cable is connected to the Echo Transmit-
ter.
2 Verify that the AC Adapter is plugged into a working 110 volt AC outlet and is
connected to the Echo Transmitter.
3 Verify that all three green LEDs on the Echo Transmitter and the single green
LED on the Echo Antenna are lit.
4 Check the Antenna Aiming/Signal Strength display on your SIRIUS radio to
verify that you have at least six bars of SAT or TER signal. (See previous sug-
gested solution.)
1 Verify that the cable from the Echo Antenna is connected to the SIRIUS radio
and that the single green LED on the Echo Antenna is lit.
Suggested Solution (s)
© Directed Electronics, all rights reserved.

Advertisement

Table of Contents
loading

Table of Contents