Preparation For Use; Unpacking And Setup; Power Sources - Emerson Research iP100 Owner's Manual

P R E PAR AT I O N F O R U S E
Unpacking And Set Up
• Remove the main unit, the AC adapter, the accessory auxiliary device
connection cord, and the 2
packing material from the main unit. We recommend that you save the carton
and packing material in the event that the unit ever needs to be returned for
service. Using the original carton and packing material is the only way to protect
your unit from damage during shipment.
•
Remove any descriptive labels or stickers from the top or front panels of the
unit but do not remove any labels or stickers from the back or bottom panels.
•
Remove the "dummy

Power Sources

This system is designed to operate on 6 "C" batteries, not included, or on normal
120V AC house current with the included AC adapter. In addition, this unit requires
2 "AA" batteries for the clock and alarm memory back up. We recommend that
you use a well-known brand of alkaline batteries for longest life and best
performance.
Attempting to operate this system from any other power source may cause damage
to the system, and such damage is not covered by your warranty.
• Replacement of batteries must be done by an adult.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium)
batteries.
• The supply terminals are not to be short-circuited.
• Non-rechargeable batteries are not to be recharged.
• Exhausted batteries are to be removed.
• Only batteries of the equivalent type are to be used.
• Batteries are to be inserted with the correct polarity.
• Dispose of batteries properly. Do not dispose of batteries in fire. The batteries
may explode or leak.
iP100_062806.p65
iPod ®
adapters from the carton, and remove all
iPod ®
" display card from the docking area and discard it.
Battery Precautions
4
28/6/2006, 9:43